Preparations
Staff
➜ Operators
Personal Protective Equipment
➜ Protective workwear
➜ Safety shoes
➜ High-visibility vest
➜ Protective gloves
➜ Industrial safety helmet
➜ Hearing protection
1. Determine the installation location in accordance with the following installation conditions:
Set-up conditions
➜ Select installation location according to the required space requirements.
➜ Inspect and ensure that the substrate meets the requirements for strength, horizontal alignment, flatness and load-bearing capacity.
➜ Observe regional regulations at the scene of the incident with regard to the areas of movement and escape routes to be kept free.
➜ When setting up the machine, keep a sufficient distance from walls and walls.
➜ When installed in a hall, ensure sufficient and safe exhaust gas evacuation from the work area.
➜ Ensure sufficient lighting conditions at the installation site for safe work during installation, operation, maintenance and repair. Observe local regulations on workplace lighting.
➜ When setting up the machine, pay attention to the wind direction. Ensure a sufficient supply of fresh air and exhaust gas evacuation due to dust pollution and to cool the machine.
2. Park the machine at the installation site
Installation requirements
| Specification | Value |
| Maximum permissible cross slope | 3° |
| Maximum permissible longitudinal inclination | 3° |
3. Align the machine horizontally using the hydraulic support
4. Block off the danger zone by setting up an access barrier and attaching the warning signs.
HINT:
The warning labels are located in the document pocket behind the safety door at the rear right.
